Top seller
No results were found for the filter!
available
RCM34-50-74020RTR1 STUART Pillar Drill 9 inch, ready to run
RCM34-50-74020RTR1 STUART Pillar Drill 9 inch, ready to run model description: the Pillar Drill has a rising table operated by a rack and pinion mechanism, in the same way as full sized machines of the period were operated. A choice of...
€1,150.00 *
available
RCM34-50-71014RTR STUART woodturning lathe, ready to run
RCM34-50-71014RTR STUART woodturning lathe, ready to run a new model to complement our already comprehensive range of workshop machinery. length 7 inches height 4 3/4 inches width 2 inches
€990.00 *
available
RCM34-50-74010RTR2 STUART Engineering Lathe , 8½" ready to run
RCM34-50-74010RTR2 STUART Engineering Lathe , 8½" ready to run diameter of the face plate Ø 40 mm model description the Stuart Engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at...
€1,130.00 *
available
RCM34-50-74070RTR STUART dynamo, fully assembled
STUART dynamo, fully assembled .producing ± 4 V @ 3000 rpm approx fully assembled without painting
€930.00 *
available
ST34-50-71300 STUART Steam Hammer, height 10½ inch
ST34-50-71300 STUART Steam Hammer, height 10½ inch ready to run assembled by a customer of us specifications height 10 1/2 Inches width 7 Inches cylinder Bore 1 Inch Diameter. cylinder Stroke 2 Inches.
€2,300.00 *
available
RCM34-50-74010RTR STUART Engineering Lathe , 8½" ready to run
RCM34-50-74010RTR STUART Engineering Lathe , 8½" ready to run diameter of the face plate Ø 40 mm model description the Stuart Engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the...
€1,130.00 *
available
RCM34-50-71300 STUART Steam Hammer, height 10½ inch
RCM34-50-71300 STUART Steam Hammer, height 10½ inch ready to run assembled by a customer of us specifications height 10 1/2 Inches width 7 Inches cylinder Bore 1 Inch Diameter. cylinder Stroke 2 Inches.
€2,500.00 *
available
RCM34-50-71151RTR STUART No. 1, height 13 inch, ready to run
" assembled by a customer of us, ready to run " model description the first Stuart No.1 was built by Mr. Stuart Turner over one hundred years ago It is a classic design, and so beautifully proportioned, that it makes the perfect display...
€1,979.00 *
available
RCM34-50-10143 STUART Puffin Horizontal Marine Power
Model Description: The Puffin engine is a twin in-line oscillating engine. We offer it mounted on a baseplate complete with a Horizontal Boiler. The plant is suitable for powering small steam launches of approximately 3 feet length....
€1,290.00 *
Viewed