Our shops: RCM CREATIONS · RCM MACHINES
Bancontact - Maestro - MasterCard - VISA
  • SALES -10 %
Offers in:
Offers for:

Horl2 standard diamond roller grinder, Oak

Artikelbild HORL2-1
Artikelbild Horl
   
available
€159.00 *

Incl. VAT, excl. shipping costs
Depending on the delivery address in the EU, the VAT rate of the destination country will be applied.

available, delivery time approx. 1-3 working days

  • RCHOEIS
RCHOEIS Horl2 standard diamond roller grinder, Oak   Two discs for precise... more
Product information "Horl2 standard diamond roller grinder, Oak"
RCHOEIS
Horl2 standard diamond roller grinder, Oak
 
Two discs for precise grinding
 
Diamond grinding wheel:
The industrial diamonds used are suitable for all knife steels of all degrees of hardness in order to sharpen efficiently without water.
If used properly, the HORL Diamant Standard never needs to be replaced.
The 46 µm grain size grinds efficiently and precisely.
 
Ceramic honing wheel:
After processing with the HORL Diamond Standard, the ceramic honing wheel significantly refines the grinding result.
The result is a smooth and clean, sharpened knife edge.
 
TWO ANGLES FOR COUNTLESS REQUIREMENTS
 
Stable edge and filigree sharpness
 
The 20 ° sharpening angle ensures a new sharpness in a short time.
In the outdoor area, too, it gives many pocket knives a stable edge and excellent sharpness for everyday use.
 
The 15 ° grinding angle for filigree sharpness
With the 15 ° sharpening angle, particularly fine blades made of damask and high-quality carbon steel are given a delicate sharpness.
These knife edges can be ground very finely.
 
The magnet grinding gauge
The secret to a constant angle.
The combination of a strong neodymium magnet and the HORL S-Pad enables the knife to be securely fixed when sharpening.
 
THREE STEPS TO NEW SHARPNESS
 
1. Loops
Hold the roller grinder by the grip roller and move the HORL diamond grinding disc back and forth in smooth movements without much pressure along the entire cutting edge.
 
2. Peel off
Turn the roller sander 180 ° and repeat step 1 with the ceramic honing wheel to smooth the edge and remove the burr.
 
3. Rotate
Turn the knife and do steps 1 and 2 on the other side of the cutting edge.
This will give you an even sharpness result.
Related links to "Horl2 standard diamond roller grinder, Oak"
Read, write and discuss reviews... more
Customer evaluation for "Horl2 standard diamond roller grinder, Oak"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed