Top seller
No results were found for the filter!
available
RCINDZTR centering mandrel for RCIND
RCINDZTR Centering mandrel for RCIND Centering mandrel made of 1.2767, centering diameter 7mm. The shank is tapered as well as the stamp to the rear, so that he can rotate freely when centering. For centering, drill a 7mm hole in a setup...
€9.90 *
available
RCIND1-4STHSS punch 1/4 " hex HSS, suitable for RCIND
RCIND1-4STHSS punch 1/4 " hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCINDST1.4VHSS punch 1/4 " HSS square , suitable for RCIND
RCINDST1.4VHSS punch 1/4 " HSS square , suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€26.00 *
available
RCINDST10VHSS punch 10 mm HSS square, suitable for RCIND
RCINDST10VHSS punch 10 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€27.00 *
available
RCINDST08VHSS punch 8 mm HSS square, suitable for RCIND
RCINDST08VHSS punch 8 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€29.00 *
available
RCINDST06VHSS punch 6 mm HSS square, suitable for RCIND
RCINDST06VHSS punch 6 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€29.00 *
available
RCIND03STHSS punch 3 mm hex HSS, suitable for RCIND
RCIND03STHSS punch 3 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND07STHSS punch 7 mm hex HSS, suitable for RCIND
RCIND07STHSS punch 7 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
out of stock
RCIND05STHSS punch 5 mm hex HSS, suitable for RCIND
RCIND05STHSS punch 5 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND08STHSS punch 8 mm hex HSS, suitable for RCIND
RCIND08STHSS punch 8 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND10STHSS punch 10 mm hex HSS, suitable for RCIND
RCIND10STHSS punch 10 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
out of stock
RCIND06STHSS punch 6 mm hex HSS, suitable for RCIND
RCIND06STHSS punch 6 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
Viewed