Top seller
No results were found for the filter!
available
RCINDST1-4V punch 1/4" mm square, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel
€19.00 *
available
RCIND055ST punch 5,5 mm hex, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCIND07ST punch 7 mm hex, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCINDST10V punch 10 mm square, suitable for RCIND
bore diameter = width key width from the punch + 0.25 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel
€19.00 *
available
RCINDST08V punch 8 mm square, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCINDST06V punch 6 mm square, suitable for RCIND6
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCIND10ST punch 10 mm hex, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCIND08ST punch 8 mm hex, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request (shapes or dimensions) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCIND05ST punch 5 mm hex, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCIND04ST punch 4 mm hex, suitable for RCIND
bore diameter = key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low CrNi,...
€19.00 *
available
RCIND1-4ST punch 1/4 " hex, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCIND06ST punch 6 mm hex, suitable for RCIND
bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
Viewed