Top seller
available
available
available
available
out of stock
out of stock
out of stock
available
No results were found for the filter!
out of stock
RC150DT4 ![Artikelbild pics 793_74023]( "Artikelbild pics 793_74023")
rotary table Ø 150 mm "VERTEX" with 4 T-slots 11 mm
rotary table Ø 150 mm "VERTEX" with 4 T-slots 11 mm RC150DT4 rotary table Ø 150 mm "VERTEX" with 4 T-slots 11 mm for horizontal and vertical use height 80 mm 4 T-slots T-slot width 11 mm the warm gear ratio is 90:1 centre sleeve MT2 center height 102 mm distance of mounting holes...
€339.00 *
out of stock
RC150DT3 ![Artikelbild pics 784_74021]( "Artikelbild pics 784_74021")
rotary table Ø 150 mm "VERTEX", with 3 T-slots 11 mm
rotary table Ø 150 mm "VERTEX", with 3 T-slots 11 mm RC150DT3 rotary table Ø 150 mm "VERTEX", with 4 T-slots 11 mm for horizontal and vertical use height 80 mm 3 T-slots T-slot width 11 mm the warm gear ratio is 90:1 centre sleeve MT2 center height 102 mm distance of mounting holes...
€339.00 *
out of stock
RC110DT ![Artikelbild RC110DT]( "Artikelbild RC110DT")
rotary table Ø 110 mm with dividing plates
rotary table Ø 110 mm with dividing plates RC110DT rotary table Ø 110 mm with dividing plates for horizontal and vertical use height 73 mm 3 T-slots T-slot width 11 mm the warm gear ratio is 90:1 centre sleeve MT2 center height 85 mm Numbers of dividing 15/16/...
€169.00 *
available
RC100DTW ![Artikelbild 200082002308_73970]( "Artikelbild 200082002308_73970")
rotary table Ø 100 mm, tilting from 0 - 90°
rotary table Ø 100 mm, tilting from 0 - 90° RC100DTW rotary table Ø 100 mm, tilting from 0 - 90° for horizontal and vertical use height 70 mm T-slot width 8 mm the warm gear ratio is 36:1 center height 80 mm at 90 ° distance of mounting holes 110 mm
€136.50 *
available
RC100DTN ![Artikelbild RC100DTN (2)]( "Artikelbild RC100DTN (2)")
rotary table Ø 100 mm with clamping kit
rotary table Ø 100 mm with clamping kit RC100DTN rotary table Ø 100 mm with clamping kit for horizontal and vertical use height 51 mm T-slot width 8 mm the warm gear ratio is 36:1 centre sleeve MT2 through hole 15 mm center height 75 mm
€109.00 *
available
RC100DT ![Artikelbild pics 234_73967]( "Artikelbild pics 234_73967")
rotary table with ball bearing Ø 100 mm with clamping kit
rotary table with ball bearing Ø 100 mm with clamping kit RC100DT rotary table with ball bearing Ø 100 mm with clamping kit for horizontal and vertical use height 54 mm T-slot width 8,7 mm the warm gear ratio is 36:1 center height 53 mm
€99.00 *
Viewed