Top seller
available
available
available
available
available
available
out of stock
available
No results were found for the filter!
available
RC200704 ![Artikelbild RC200704_1]( "Artikelbild RC200704_1")
cast iron base - upper part for horizontal flamelickers
cast iron base - upper part for horizontal flamelickers the quick solution for the production of a large flamelickers sizes below 130 x 100 mm dimensions above 100 mm dia dimensions Ø 50 mm hole to middle hole 95 mm
€39.00 *
available
RC200703 ![Artikelbild RC200703]( "Artikelbild RC200703")
cast iron base - upper part for vertical flamelickers
cast iron base - upper part for vertical flamelickers above and below ground base, the quick solution for the production of a large flamelickers sizes below 200 x 95 mm dimensions above 100 mm dia dimensions Ø 55 mm hole overall height 200 mm
€49.00 *
available
RC200701 ![Artikelbild RC200701]( "Artikelbild RC200701")
cast iron base for vertical flamelickers
cast iron base for vertical flamelickers above and below ground base fhe quick solution for the production of a large flamelicker sizes below 300 x 170 mm dimensions above 245 x 110 mm dimensions 138 x 55 mm hole overall height 120 mm
€56.00 *
available
RCM34-50-74020 ![Artikelbild 200082003007_72902]( "Artikelbild 200082003007_72902")
STUART Pillar Drill 9 inch, set of castings
STUART Pillar Drill 9 inch, set of castings model description the Pillar Drill has a rising table operated by a rack and pinion mechanism, in the same way as full sized machines of the period were operated a choice of running speeds can be selected by utilising the stepped pulley...
auf Anfrage
available
RCM34-50-74010 ![Artikelbild 200082000028_72900]( "Artikelbild 200082000028_72900")
STUART Engineering Lathe , 8½" set of castings
STUART Engineering Lathe , 8½" set of castings model description the Stuart engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the end of the 19th century and combining them to produce an attractive model please remember that...
€189.00 *
available
RCM34-50-71315 ![Artikelbild stuarts50_72879]( "Artikelbild stuarts50_72879")
STUART S50, length 8½ inch , set of castings
STUART S50, length 8½ inch , set of castings model description the Stuart S50 is an elegant model of a typical mill engine, as used in the North of England, to power small factories throughout the 19th and early 20th Centuries the Stuart S50 is an ideal "first time" model...
auf Anfrage
available
RCM34-50-71306 ![Artikelbild 200082004087_72878]( "Artikelbild 200082004087_72878")
STUART Twin Oscillator 64 mm, inch, set of castings
STUART Twin Oscillator 64 mm, inch, set of castings model description the twin oscillator is a new model developed from the recently revived S.T. Oscillator the main advantage of the Twin Oscillator over the single apart from the greater power, is that the engine comes complete with...
auf Anfrage
available
RCM34-50-71303 ![Artikelbild 200082000023_72877]( "Artikelbild 200082000023_72877")
STUART Oscillator 64 mm, set of castings
STUART Oscillator 64 mm, set of castings model description the Stuart oscillator set of castings is an ideal "first time" model engineering project it is supplied as a full set of castings together with all the materials, fixings and drawings needed to finish the model please...
auf Anfrage
available
RCM34-50-71195 ![Artikelbild 200082000019_72870]( "Artikelbild 200082000019_72870")
STUART 10H, length 6 inch, set of castings
STUART 10H, length 6 inch, set of castings model description the stuart 10H is a development from the popular 10V engine it is more than capable of 'doing work' and can easily power a small dynamo or pump. this small horizontal engine offers both power when run at high speed and...
auf Anfrage
available
RCM34-50-71183 ![Artikelbild 200082003144_72869]( "Artikelbild 200082003144_72869")
STUART No. 10V, hength 6 inch, set of castings
STUART No. 10V, hength 6 inch, set of castings steam model description the Stuart 10V is the most popular engine in our range the attractive design, and the fact that it can be built on a 3 1/2 in. lathe, make it an ideal project for the novice to assist the beginner the book "...
auf Anfrage
out of stock
RCMODTKS ![Artikelbild rcmodtks_77528]( "Artikelbild rcmodtks_77528")
vintage Table Saw Kit, set of castings
vintage Table Saw Kit, set of castings set of castings please remember our sets of castings require the use of a lathe and milling machine to turn them into a working steam engine !!!
€97.00 *
available
RC200702 ![Artikelbild RC200702]( "Artikelbild RC200702")
cast iron base for horizontal flamelickers
cast iron base for horizontal flamelickers above and below ground base fhe quick solution for the production of a large flamelicker sizes below 265 x 180 mm dimensions above 195 x 115 mm dimensions 138 x 55 mm hole overall height 96 mm
€46.00 *
Viewed