Stuart

Set of casting

Assembled kit

Accessories

Top seller

available

RCM32-50-72069

STUART taps BA5 pre-cutter

€11.50 *

available

RCM32-50-72070

STUART tap BA5 second

€11.50 *

available

RCM32-50-73008

STUART 1/8" x 40 TPI tapping drill

€7.73 *

available

RCM32-50-73015

STUART 5/16" x 26 TPI tapping drill

€11.60 *

available

RCM32-50-73058

STUART 1/8" x 40tpi clearance drill

€5.52 *

available

RCM32-50-73065

STUART 5/16" x 26 TPI clearance drill

€16.56 *

available

RCM34-50-10143

STUART Puffin Horizontal Marine Power

€1,290.00 *

available

RCM34-50-71151RTR

STUART No. 1, height 13 inch, ready to run

€1,979.00 *

Filter

2 From 3

No results were found for the filter!

available

RCM34-50-74010RTR

STUART Engineering Lathe , 8½" ready to run

RCM34-50-74010RTR STUART Engineering Lathe , 8½" ready to run diameter of the face plate Ø 40 mm model description the Stuart Engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the...

€1,130.00 *

available

RCM34-50-74010

STUART Engineering Lathe , 8½" set of castings

model description the Stuart engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the end of the 19th century and combining them to produce an attractive model please remember that...

€189.00 *

available

RCM34-50-72004

STUART Union Cock for 1/4" Pipe, threaded 3/8 x 26 tpi.

Schlauchanschluss 1/4"

€30.00 *

available

RCM34-50-71962

STUART Drain Cock threaded 1/4 Inch.

€21.95 *

available

RCM34-50-71833

STUART Oil Cup Scrd. 3/16"

€9.40 *

available

RCM34-50-71831

STUART Oil Cup Scrd 1/8" x 40

auf Anfrage

available

RCM34-50-71323

STUART Spring Safety Valve

€30.36 *

available

RCM34-50-71315

STUART S50, length 8½ inch , set of castings

model description the Stuart S50 is an elegant model of a typical mill engine, as used in the North of England, to power small factories throughout the 19th and early 20th Centuries the Stuart S50 is an ideal "first time" model...

auf Anfrage

available

RCM34-50-71306

STUART Twin Oscillator 64 mm, inch, set of castings

model description the twin oscillator is a new model developed from the recently revived S.T. Oscillator the main advantage of the Twin Oscillator over the single apart from the greater power, is that the engine comes complete with...

auf Anfrage

available

RCM34-50-71303

STUART Oscillator 64 mm, set of castings

model description the Stuart oscillator set of castings is an ideal "first time" model engineering project it is supplied as a full set of castings together with all the materials, fixings and drawings needed to finish the model please...

auf Anfrage

available

RCM34-50-71300

STUART Steam Hammer, height 10½ inch

RCM34-50-71300 STUART Steam Hammer, height 10½ inch ready to run assembled by a customer of us specifications height 10 1/2 Inches width 7 Inches cylinder Bore 1 Inch Diameter. cylinder Stroke 2 Inches.

€2,500.00 *

available

RCM34-50-71236

4 pieces STUART 1/4 " O- Ring

€5.52 *

2 From 3