Top seller
available
available
available
available
available
available
available
available
No results were found for the filter!
available
RC110DTV ![Artikelbild RC110DTV]( "Artikelbild RC110DTV")
110 mm tilting rotary table 0 - 90°
110 mm tilting rotary table 0 - 90° RC110DTV 110 mm tilting rotary table 0 - 90° rotary table 110 mm height 120 mm T-slot width 11 mm the warm gear ratio is 90:1 centre sleeve MT2
€159.00 * €209.00 *
available
RCBSB118-80 ![Artikelbild Bild 2275_84873]( "Artikelbild Bild 2275_84873")
drilling machine vise, forged, jaw width 80 mm
drilling machine vise, forged, jaw width 80 mm RCBSB118-80 drilling machine vise, forged, jaw width 80 mm maximum jaw opening 85 mm jaw height 30 mm overall height 60 mm mounting distance 120 mm The forged drilling machine vise with a jaw width of 80 mm is a powerful tool for precise...
€89.00 * €129.00 *
available
RCRB695 ![Artikelbild RCRB695]( "Artikelbild RCRB695")
single feed roller, adjustable height 740 - 1180 mm
single feed roller, adjustable height 740 - 1180 mm RCRB695 single feed roller, adjustable height 680 - 1100 mm mounted with ball bearings roll length 400 mm roll diameterr 57 mm
€75.00 * €95.00 *
available
RCPT16-5 ![Artikelbild RCPT165]( "Artikelbild RCPT165")
16 mm set of 5 pcs. indexable carbide turning tools
16 mm set of 5 pcs. indexable carbide turning tools RCPT16-5 set of 5 pcs. indexable carbide turning tool shank height 16 mm / cutting height 12 mm set with the same tip TCMT16!!
€48.00 * €65.00 *
available
RCNIB ![Artikelbild rcnib]( "Artikelbild rcnib")
double end head cutter
double end head cutter RCNIB double end head cutter included 1 wrench 1 replacement blade double end head cutter 1 spare holder with thread max. cutting thickness steel plate 1,8 mm max. cutting thickness stainless steel plate 1,2 mm max. cutting thickness...
€19.90 * €26.00 *
available
available
RCLP25K ![Artikelbild 200082007231_77088]( "Artikelbild 200082007231_77088")
headband magnifier 2.5 x power, weight only 50 g.
headband magnifier 2.5 x power, weight only 50 g. RCLP25K headband magnifier 2.5 x power, weight only 50 g.
€3.20 * €4.90 *
available
RCLKDM10 ![Artikelbild RCLKDM10_1]( "Artikelbild RCLKDM10_1")
indexable lathe tool 10 mm incl. tip DCMT07
indexable lathe tool 10 mm incl. tip DCMT07 RCLKDM10 indexable lathe tool 10 mm incl. tip DCMT07 shank height 10 mm shank lenght 105 mm
€9.80 * €14.00 *
available
RCKS2 ![Artikelbild RCKS2]( "Artikelbild RCKS2")
taper shank circular cutter with HSS blade, CM2
taper shank circular cutter with HSS blade, CM2 RCKS2 taper shank circular cutter with HSS blade, CM2 adjustable from 30 - 300 mm depth cutting to 10 mm
€79.00 * €114.00 *
available
RCKL6003-2Z ![Artikelbild Bilder 803_76940]( "Artikelbild Bilder 803_76940")
ball bearing, SKF 6003-2Z, 17 x 35 x 10 mm
ball bearing, SKF 6003-2Z, 17 x 35 x 10 mm inside Ø 17 mm outside Ø 37 mm width 10 mm weight 40.00 g other sizes on request 2Z: Steel cover plates on both sides of the bearing
€5.90 * €12.00 *
available
RCGBSE ![Artikelbild RCGBSE_1]( "Artikelbild RCGBSE_1")
HSS tap and dies set M3-M4-M5-M6-M8-M10-M12
HSS tap and dies set M3-M4-M5-M6-M8-M10-M12 RCGBSE HSS tap and dies set M3-M4-M5-M6-M8-M10-M12
€55.00 * €89.00 *
available
RCFZG ![Artikelbild 200082003889_76080]( "Artikelbild 200082003889_76080")
Royal gas 250 ml, lighter gas 250 ml, refill gas
Royal gas 250 ml, lighter gas 250 ml, refill gas RCFZG Royal gas 250 ml, lighter gas 250 ml, refill gas
€0.99 * €2.50 *
Viewed