Top seller
No results were found for the filter!
available
RCDCMT11VA tip DCMT11 T304-HM RT300 for stainless steel
RCDCMT11VA Replacement turning insert DCMT 11T304-HM RT300 Screw M4 DCMT 11T304-HM RT300 Radius 0.4 Length L 11.6 Ø I.C 9.525 S 3.97 Ø d 4.4 Application: Steel and stainless steel Steel: Cutting speed Vc= 120-240 m/min Feed f=0.05-0.2...
€9.50 *
available
RCCPGT05 spare tip for aluminium and plastic
RCCPGT05 spare tip for aluminium and plastic CPGT 05T thickness 2 mm length 8,44 mm width 7,19 mm hole Ø 2,5 mm
€11.20 *
available
RCCCMT06B spare tip CCMT06 blue, screw M2,5
RCCCMT06B spare tip CCMT06 blue, screw M2,5 Bule Nano Coating/Hardness up to HRC40
€7.20 *
available
RCDCMT07B spare tip DCMT07 blue
RCDCMT07B spare tip DCMT07 blue, screw M2,5 Bule Nano Coating/Hardness up to HRC40
€7.25 *
available
RCSCGT09 spare tip SCMG 09 for non-ferrous metals & pvc, radius 04
RCSCGT09 spare tip SCMG 09 for non-ferrous metals & pvc, radius 04 ground and polished, with sharp cutting for non-ferrous metals & PVC screw M4
€6.85 *
available
RCVCMT11N spare tip RCVCMT11N for outside carbide tipped
RCVCMT11N spare tip RCVCMT11N for outside carbide tipped screw M2,5
€14.50 *
available
RCVCGT11 spare tip for non-ferrous metals and PVC VCGT11
RCVCGT11 spare tip for non-ferrous metals and PVC VCGT11 spare tip for non-ferrous metals and PVC ground and polished , with sharp cutting for aluminium, brass & pvc thickness 2,5 mm length 19,5 mm width 6,5 mm hole Ø 2,5 mm screw M2,5
€6.45 *
available
RCCCGT09 spare tip CCGT 09
RCCCGT09 spare tip CCGT 09 ( CCMT 09 for aluminium and plastic ) ground and polished , with sharp cutting screw M4
€6.85 *
available
RCVCGT16 spare tip for non-ferrous metals and pvc VCGT16
RCVCGT16 spare tip for non-ferrous metals and pvc VCGT16 spare tip for non-ferrous metals and PVC ground and polished , with sharp cutting for aluminium, brass & pvc thickness 4,5 mm length 28 mm width 10 mm hole Ø 4 mm screw M4
€7.20 *
available
RCDCGT07 spare tip for non-ferrous metals and pvc. DCGT 07
RCDCGT07 spare tip for non-ferrous metals and pvc. DCG T07 ground and polished , with sharp cutting DCMT 07 for non-ferrous metals & pvc thickness 2,5 mm length 13 mm width 7 mm hole Ø 2,5 mm radius 04
€7.20 *
available
RCVCGT22 spare tip for non-ferrous metals and pvc VCGT22
RCVCGT22 spare tip for non-ferrous metals and pvc VCGT22 spare tip for non-ferrous metals and pvc ground and polished , with sharp cutting thickness 5 mm length 28 mm width 13 mm hole Ø 5 mm screw M5
€13.50 *
available
RCCNGP12 spare tip - 8 cutting for aluminum
RCCNGP12 spare tip - 8 cutting for aluminum ground and polished , with sharp cutting CNMG-alu with 4 cutting edges thickness 4,50 mm length 18,90 mm width 16,10 mm Ø 5 mm
€8.90 *
Viewed