Top seller
available
available
available
available
available
available
available
available
No results were found for the filter!
available
RCIND1-4STHSS ![Artikelbild RCIND1-4STHSS]( "Artikelbild RCIND1-4STHSS")
punch 1/4 " hex HSS, suitable for RCIND
punch 1/4 " hex HSS, suitable for RCIND RCIND1-4STHSS punch 1/4 " hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCINDST1.4VHSS ![Artikelbild RCINDST1]( "Artikelbild RCINDST1")
punch 1/4 " HSS square , suitable for RCIND
punch 1/4 " HSS square , suitable for RCIND RCINDST1.4VHSS punch 1/4 " HSS square , suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€26.00 *
available
RCINDST10VHSS ![Artikelbild RCINDST10VHSS]( "Artikelbild RCINDST10VHSS")
punch 10 mm HSS square, suitable for RCIND
punch 10 mm HSS square, suitable for RCIND RCINDST10VHSS punch 10 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€27.00 *
available
RCINDST08VHSS ![Artikelbild RCINDST08VHSS]( "Artikelbild RCINDST08VHSS")
punch 8 mm HSS square, suitable for RCIND
punch 8 mm HSS square, suitable for RCIND RCINDST08VHSS punch 8 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€29.00 *
available
RCINDST06VHSS ![Artikelbild RCINDST06VHSS]( "Artikelbild RCINDST06VHSS")
punch 6 mm HSS square, suitable for RCIND
punch 6 mm HSS square, suitable for RCIND RCINDST06VHSS punch 6 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€29.00 *
available
RCIND03STHSS ![Artikelbild RCIND03STHSS]( "Artikelbild RCIND03STHSS")
punch 3 mm hex HSS, suitable for RCIND
punch 3 mm hex HSS, suitable for RCIND RCIND03STHSS punch 3 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND07STHSS ![Artikelbild RCIND07STHSS]( "Artikelbild RCIND07STHSS")
punch 7 mm hex HSS, suitable for RCIND
punch 7 mm hex HSS, suitable for RCIND RCIND07STHSS punch 7 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
out of stock
RCIND05STHSS ![Artikelbild RCIND05STHSS]( "Artikelbild RCIND05STHSS")
punch 5 mm hex HSS, suitable for RCIND
punch 5 mm hex HSS, suitable for RCIND RCIND05STHSS punch 5 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND08STHSS ![Artikelbild RCIND08STHSS]( "Artikelbild RCIND08STHSS")
punch 8 mm hex HSS, suitable for RCIND
punch 8 mm hex HSS, suitable for RCIND RCIND08STHSS punch 8 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND10STHSS ![Artikelbild RCIND10STHSS]( "Artikelbild RCIND10STHSS")
punch 10 mm hex HSS, suitable for RCIND
punch 10 mm hex HSS, suitable for RCIND RCIND10STHSS punch 10 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
out of stock
RCIND06STHSS ![Artikelbild RCIND06STHSS]( "Artikelbild RCIND06STHSS")
punch 6 mm hex HSS, suitable for RCIND
punch 6 mm hex HSS, suitable for RCIND RCIND06STHSS punch 6 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCINDST1-4V ![Artikelbild RCINDST1-4V_1]( "Artikelbild RCINDST1-4V_1")
punch 1/4" mm square, suitable for RCIND
punch 1/4" mm square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel
€19.00 *
Viewed