stamps for RCIND

available

RCIND055ST

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCIND07ST

punch 7 mm hex, suitable for RCIND

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCINDST10V

punch 10 mm square, suitable for RCIND

bore diameter = width key width from the punch + 0.25 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel

€19.00 *

available

RCINDST08V

punch 8 mm square, suitable for RCIND

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCINDST06V

punch 6 mm square, suitable for RCIND6

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCIND10ST

punch 10 mm hex, suitable for RCIND

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCIND08ST

punch 8 mm hex, suitable for RCIND

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request (shapes or dimensions) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCIND05ST

punch 5 mm hex, suitable for RCIND

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCIND04ST

punch 4 mm hex, suitable for RCIND

bore diameter = key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low CrNi,...

€19.00 *

available

RCIND1-4ST

punch 1/4 " hex, suitable for RCIND

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *

available

RCIND06ST

punch 6 mm hex, suitable for RCIND

bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...

€19.00 *