Products from STUART
No results were found for the filter!
available
RCM34-50-74020RTR1 STUART Pillar Drill 9 inch, ready to run
RCM34-50-74020RTR1 STUART Pillar Drill 9 inch, ready to run model description: the Pillar Drill has a rising table operated by a rack and pinion mechanism, in the same way as full sized machines of the period were operated. A choice of...
€1,150.00 *
available
RCM34-50-71014RTR STUART woodturning lathe, ready to run
RCM34-50-71014RTR STUART woodturning lathe, ready to run a new model to complement our already comprehensive range of workshop machinery. length 7 inches height 4 3/4 inches width 2 inches
€990.00 *
available
RCM34-50-74010RTR2 STUART Engineering Lathe , 8½" ready to run
RCM34-50-74010RTR2 STUART Engineering Lathe , 8½" ready to run diameter of the face plate Ø 40 mm model description the Stuart Engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at...
€1,130.00 *
available
RCM34-50-74070RTR STUART dynamo, fully assembled
STUART dynamo, fully assembled .producing ± 4 V @ 3000 rpm approx fully assembled without painting
€930.00 *
available
RCM34-50-71014 STUART woodturning lathe, set of castings
new, without base plate !! a new model to complement our already comprehensive range of workshop machinery. length 7 inches height 4 3/4 inches width 2 inches please remember that whilst the gears are provided pre cut, to aid the...
€255.00 *
available
available
available
available
RCM34-50-74070 STUART dynamo, set of castings
Castings, all materials, fixings and drawings. The Stuart Models Dynamo is a fine example of the type instaled at the turn of the century in factories and workshops. Producing 4 V @ 3000 rpm approx please remember our sets of castings...
auf Anfrage
available
STUARTCAT catalog STUART MODELS 2003-2005
STUARTCAT catalog STUART MODELS 2003-2005 in english
€10.50 *
available
RCM34-50-74020 STUART Pillar Drill 9 inch, set of castings
model description the Pillar Drill has a rising table operated by a rack and pinion mechanism, in the same way as full sized machines of the period were operated a choice of running speeds can be selected by utilising the stepped pulley...
auf Anfrage
available
RCM34-50-74010RTR STUART Engineering Lathe , 8½" ready to run
RCM34-50-74010RTR STUART Engineering Lathe , 8½" ready to run diameter of the face plate Ø 40 mm model description the Stuart Engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the...
€1,130.00 *
Viewed