Top seller
available
available
available
available
available
available
available
available
No results were found for the filter!
available
available
RCGBV55 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 5.5 mm
Tap Extensions for Square 5.5 mm RCGBV55 Standard DIN 377, Squares according to DIN 10 Drive connector Square 5.5 mm Length 115 mm
€5.90 *
available
RCGBV49 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 4.9 mm
Tap Extensions for Square 4.9 mm RCGBV49 Standard DIN 377, Squares according to DIN 10 Drive connector Square 4.9 mm Length 110 mm
€5.80 *
available
RCGBV43 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 4.3 mm
Tap Extensions for Square 4.3 mm RCGBV43 Standard DIN 377, Squares according to DIN 10 Drive connector Square 4.3 mm Length 105 mm
€5.60 *
available
RCGBV38 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 3.8 mm
Tap Extensions for Square 3.8 mm RCGBV38 Standard DIN 377, Squares according to DIN 10 Drive connector Square 3.8 mm Length 100 mm
€5.80 *
available
RCGBV34 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 3.4 mm
Tap Extensions for Square 3.4 mm RCGBV34 Standard DIN 377, Squares according to DIN 10 Drive connector Square 3.4 mm Length 95 mm
€4.90 *
available
RCGBV30 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 3.0 mm
Tap Extensions for Square 3.0 mm RCGBV30 Standard DIN 377, Squares according to DIN 10 Drive connector Square 3.0 mm Length 90 mm
€4.20 *
available
RCGBV27 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 2.7 mm
Tap Extensions for Square 2.7 mm RCGBV27 Standard DIN 377, Squares according to DIN 10 Drive connector Square 2.7 mm Length 80 mm
€4.20 *
available
RCGBV24 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 2.4 mm
Tap Extensions for Square 2.4 mm RCGBV24 Standard DIN 377, Squares according to DIN 10 Drive connector Square 2.4 mm Length 70 mm
€4.20 *
available
RCGBV21 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 2.1 mm
Tap Extensions for Square 2.1 mm RCGBV21 Standard DIN 377, Squares according to DIN 10 Drive connector Square 2.1 mm Length 60 mm
€4.20 *
available
RCGSF4.7 ![Artikelbild RCGSF4]( "Artikelbild RCGSF4")
quick change tapping drill chuck MT4
quick change tapping drill chuck MT4 RCGSF4.7 quick change tapping drill chuck MT4 including 7 collets for thread cutting from M3 to M12 shank Ø x square M3 2.24 x 1,80 mm M4 3.15 x 2,50 mm M5 4.0 x 3,15 mm M6 4.5 x 3,55 mm M8 6.3 x 5,00 mm M10 8.0 x 6,30 mm M12 9.0 x 7,00 mm
€169.00 *
available
RCZKl235 ![Artikelbild RCZKl235_1]( "Artikelbild RCZKl235_1")
adjustable centering punch Ø up to 35 mm
adjustable centering punch Ø up to 35 mm RCZKl235 adjustable centering punch Ø up to 35 mm engineers bell punch center finder bell punch easily locates and allows center punching of ends on round stock of up to 35 mm hardened to 48-52 HRC a very handy tool if required precise...
€19.90 *
Viewed