Top seller
available
available
available
available
available
available
available
available
No results were found for the filter!
available
RCGHVG ![Artikelbild RCGHVG_2]( "Artikelbild RCGHVG_2")
tap wrench with extension
tap wrench with extension RCGHVG tap wrench with extension overall length 280 mm square 8,90 mm head Ø 26 mm clamping range: min 4.30 mm max. 7 mm
€11.00 *
available
RCGHVK ![Artikelbild RCGHVK_2]( "Artikelbild RCGHVK_2")
tap wrench with extension
tap wrench with extension RCGHVK tap wrench with extension overall length 185 mm square 6.80 mm head Ø 22 mm Clamping range up to 4 mm max.
€12.00 *
out of stock
RCGBFD1 ![Artikelbild RCGBFD1]( "Artikelbild RCGBFD1")
tap guide suitable for use on lathe
tap guide suitable for use on lathe RCGBFD1 tap guide suitable for use on lathe pin for male hole centering of tap adjustable tension of spring 13 mm de course overall length 85 mm shank 12,5 mm
€12.90 *
available
RCSEH2.1216 ![Artikelbild RCSEH2]( "Artikelbild RCSEH2")
sliding tail stock die holder MT2, holder Ø 12 amd 16 mm
sliding tail stock die holder MT2, holder Ø 12 amd 16 mm RCSEH2.1216 sliding tail stock die holder MT2, holder Ø 12 amd 16 mm 1 holder with 12 mm and 16 mm the die holder is 30 mm sliding
€49.00 *
available
RCSEH1.1216 ![Artikelbild RCSEH1]( "Artikelbild RCSEH1")
sliding tail stock die holder MT1, holder Ø 12 amd 16 mm
sliding tail stock die holder MT1, holder Ø 12 amd 16 mm RCSEH1.1216 sliding tail stock die holder MT1, holder Ø 12 amd 16 mm the die holder is 30 mm sliding
€63.00 *
available
RCGSF312 ![Artikelbild RCGSF312]( "Artikelbild RCGSF312")
7 dies guides M 3 - M 12 DIN 223
7 dies guides M 3 - M 12 DIN 223 RCGSF312 7 dies guides M 3 - M 12 DIN 223 guide diameter Ø 3 mm Ø 4 mm Ø 5 mm Ø 6 mm Ø 8 mm Ø 10 mm Ø 12 mm
€11.90 *
out of stock
RCSMK2 ![Artikelbild RCSMK2_001_78888]( "Artikelbild RCSMK2_001_78888")
sliding tail stock die holder MT2
sliding tail stock die holder MT2 RCSMK2 sliding tail stock die holder MT2 1 holder with 20.65 mm ( 13/16 " ) and 25.4 mm ( 1" ) 1 holder with 33.35 mm ( 1 5/16" ) 1 holder with 38 mm ( 1 1/2 " ) the die holder is 50 mm sliding
€39.00 *
available
RCGSF424 ![Artikelbild RCGSF424]( "Artikelbild RCGSF424")
quick change tapping drill chuck MT4
quick change tapping drill chuck MT4 RCGSF424 quick change tapping drill chuck MT4 for thread cutting from M12 to M24 shank Ø M12 7,50 mm M14 9,00 mm M16 10,00 mm M18 11,50 mm M20 11,50 mm M22 12,50 mm M24 14,00 mm
€179.00 *
available
RCGSF4 ![Artikelbild RCGSF4]( "Artikelbild RCGSF4")
quick change tapping drill chuck MT4
quick change tapping drill chuck MT4 RCGSF4 quick change tapping drill chuck MT4 for thread cutting M3-M12 including 5 collets for thread cutting from M3 to M12 shank Ø x square M3 4.0 x 3.15 mm M5 5.0 x 4.00 mm M6 6.3 x 5.50 mm M10 8.0 x 6,30 mm M12 9.0 x 7,00 mm
€169.00 *
available
RCGSF3 ![Artikelbild RCGSF3]( "Artikelbild RCGSF3")
quick change tapping drill chuck MT3
quick change tapping drill chuck MT3 RCGSF3 quick change tapping drill chuck MT3 incl. 7 collets for thread cutting M3 - M12 shank Ø x square M3 2.24 x 1,80 mm M4 3.15 x 2,50 mm M5 4.0 x 3,15 mm M6 4.5 x 3,55 mm M8 6.3 x 5,00 mm M10 8.0 x 6,30 mm M12 9.0 x 7,10 mm
€139.00 *
available
RCGSA4 ![Artikelbild 200082000969_76271]( "Artikelbild 200082000969_76271")
reverse tap holder M8-M20, shank MT3 and MT4
reverse tap holder M8-M20, shank MT3 and MT4 RCGSA4 reverse tap holder M8-M20, shank MT3 and MT4 with return and slipping clutch
€398.00 *
available
Viewed