Products from Vertex
No results were found for the filter!
out of stock
RCMLVLED ![Artikelbild RCMLVLEDa]( "Artikelbild RCMLVLEDa")
Vertex LED lamp with 100 cm gooseneck arm
Vertex LED lamp with 100 cm gooseneck arm RCMLVLED Vertex LED lamp with 70 cm gooseneck arm and magnetic base 230 V.
€136.00 *
out of stock
RC200DT4 ![Artikelbild RC200DT4]( "Artikelbild RC200DT4")
rotary table Ø 200 mm, "VERTEX" with 4 T-slots 14 mm
rotary table Ø 200 mm, "VERTEX" with 4 T-slots 14 mm for horizontal and vertical use height horizontal 105 mm 4 T-slots 14 mm the warm gear ratio is 90:1 centre sleeve MT3 center height 135 mm 28kg
€529.00 *
out of stock
RCSTSMT100150 ![Artikelbild RCSTSMT100150]( "Artikelbild RCSTSMT100150")
bowl diamond grinding wheel, grit 150, boring Ø 20 mm
bowl diamond grinding wheel, grit 150, boring Ø 20 mm RCSTSMT100150 bowl diamond grinding wheel, grit 150, boring Ø 20 mm outside diameter Ø 100 mm dimensions of the grinding wheel 100 x 32 mm dimensions of the grinding surface 10,50 x 3 x Ø 100 mm
€79.00 *
available
RCRST65138 ![Artikelbild RCRST65138_1]( "Artikelbild RCRST65138_1")
tailstock height adjustable from 65 to 138 mm
tailstock height adjustable from 65 to 138 mm RCRST65138 tailstock height adjustable from 65 to 138 mm dimensions of the plate 150 mm x 105 mm distance of the mounting holes 110 mm overall height 140 mm
€89.00 *
out of stock
RCRST2N ![Artikelbild 200082001752_78467]( "Artikelbild 200082001752_78467")
tailstock height adjustable from 83 to 145 mm
tailstock height adjustable from 83 to 145 mm RCRST2N tailstock height adjustable from 83 to 145 mm for RC200DT and RC200DTSS sleeve travel 25 mm dimensions of the plate 155 mm x 110 mm distance of the mounting holes 130 mm overall height 150 mm
€120.00 *
available
RC110DTV ![Artikelbild RC110DTV]( "Artikelbild RC110DTV")
110 mm tilting rotary table 0 - 90°
110 mm tilting rotary table 0 - 90° RC110DTV 110 mm tilting rotary table 0 - 90° rotary table 110 mm height 120 mm T-slot width 11 mm the warm gear ratio is 90:1 centre sleeve MT2
€159.00 * €209.00 *
available
RCKMEV ![Artikelbild 200082003079_76976]( "Artikelbild 200082003079_76976")
"Original VERTEX" coolant system 16 L 230V/90W
"Original VERTEX" coolant system 16 L 230V/90W RCKMEV "Original VERTEX" coolant system 16 L 230V/90W with flexible tube on magnetic base sizes 350 x 250 x 185 mm height with pump 340 mm
€320.00 *
available
U2-R ![Artikelbild U2-R_82573]( "Artikelbild U2-R_82573")
diamond grinding wheel "VERTEX"
diamond grinding wheel "VERTEX" U2-R diamond grinding wheel "VERTEX" grit 200 outside Ø 100 mm boring Ø 20 mm thickness 40 mm compatible with RCSTSMV, RCSTSM and similar
€124.00 *
available
RCV100 ![Artikelbild 200082002008_79632]( "Artikelbild 200082002008_79632")
rotary table 110 mm, "VERTEX"
rotary table 110 mm, "VERTEX" RCV100 rotary table 110 mm, "VERTEX" for horizontal and vertical use height 72 mm 3 T-slots T-slot width 11 mm the warm gear ratio is 90:1 centre sleeve MT2 center height 81 mm
€299.00 *
available
RCSTSMVD ![Artikelbild rcstsmvd]( "Artikelbild rcstsmvd")
lathe tool grinding attachment Vertex for RCSTSMV
lathe tool grinding attachment Vertex for RCSTSMV RCSTSMVD lathe tool grinding attachment Vertex for RCSTSMV
€189.00 *
out of stock
RCSTSMVB ![Artikelbild RCSTSMVB_2]( "Artikelbild RCSTSMVB_2")
twist drill grinding attachment Vertex for RCSTSMV
twist drill grinding attachment Vertex for RCSTSMV RCSTSMVB twist drill grinding attachment Vertex for RCSTSMV
€198.00 *
available
RCSTSMV ![Artikelbild RCSTSMV009_79158]( "Artikelbild RCSTSMV009_79158")
U2 ( S20 X 2 ) universal cutter grinder VERTEX
U2 ( S20 X 2 ) universal cutter grinder VERTEX RCSTSMV U2 ( S20 X 2 ) universal cutter grinder VERTEX maximum grinding diameter 25 mm taper angle 0° - 180° negativ angle 0° - 26° relief angle 0° - 45° speed 3600 rpm. motor 230 V / 0,25 kW standard equipment 5 collets U2 4/6/8/10/12...
€2,200.00 *
Viewed