Our shops: RCM CREATIONS · RCM MACHINES
Bancontact - Maestro - MasterCard - VISA
  • SALES -10 %
Offers in:
Offers for:

centering mandrel for RCIND

Artikelbild RCINDZTR
Artikelbild RCINDZTR_1
Artikelbild RCINDZTR_2
     
available
€7.00 *

Prices incl. 17% VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • RCINDZTR
RCINDZTR Centering mandrel for RCIND Centering mandrel made of 1.2767, centering... more
Product information "centering mandrel for RCIND"

RCINDZTR

Centering mandrel for RCIND

Centering mandrel made of 1.2767, centering diameter 7mm. The shank is tapered as well as the stamp to the rear, so that he can rotate freely when centering. For centering, drill a 7mm hole in a setup part that runs around in the chuck. Then loosen the two clamping screws and center with this mandrel by guiding the mandrel into the pre-drilled hole. Now tighten the clamping screws and check the free movement of the mandrel by hand. If it is free, the device is ready for use after you have installed the required stamp

Related links to "centering mandrel for RCIND"
Read, write and discuss reviews... more
Customer evaluation for "centering mandrel for RCIND"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Frequently asked question on "centering mandrel for RCIND"
New question for this article ...
New question for this article ...
(eMail will not be published)

The fields marked with * are required.

I have read and accepted the privacy policy .
available
available
RCSBT3.0-5 Artikelbild RCSBT3 1 pcs. HSS drill TIN coated 3,0 mm
From €2.35 *
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
available
RCTPUN16 Artikelbild rctpun16 spare tip TPUN16
€6.90 *
available
RCTCMT16 Artikelbild RCTCMT16 spare tip TCMT 16
€5.70 *
available
RCMODEL06MS Artikelbild 200082002765_88234 cannon, set of castings
€29.00 *
available
available
available
available
available
available
available
available
available
available
available
available
RCIND25B16R Artikelbild RCIND25B16R 25 mm & B16 shank to RCIND
€65.00 *
Viewed