Our shops: RCM CREATIONS · RCM MACHINES
Bancontact - Maestro - MasterCard - VISA
  • SALES -10 %
Offers in:
Offers for:
Top seller
Close filters
 
  •  
  •  
from to
1 From 10
No results were found for the filter!
available
RCER40H Artikelbild RCER40H
ER40 collet block hex
RCER40H ER40 collet block hex 64 mm
€128.00 *
out of stock
RCER25H Artikelbild RCER25H
ER25 collet block hex
RCER25H ER25 collet block hex 52 mm
€105.00 *
available
RCER32V Artikelbild RCER32V
ER32 collet block square
RCER32V ER32 collet block square 40 mm
€118.00 *
available
RCER32H Artikelbild RCER32H
ER32 collet block hex
RCER32H ER32 collet block hex 40 mm
€112.00 *
available
RCW20M12 Artikelbild RCW20M12_2
W20/thread S19.7 x 1.666 drill chuck arbors with M12x1
RCW20M14 W20/thread S19.7 x 1.666 drill chuck arbors with M14x1 material 42CrMoS steel!
€29.00 *
available
RCFFLZ220080 Artikelbild Bild 001_86226
steel back plate Ø 80 mm for Weiler LZ220
RCFFLZ220080 steel back plate Ø 80 mm for Weiler LZ220 and identical machines! with thread M40x3.5, fit 42 mm suitable for mounting a 80 mm chuck!
€79.00 *
available
RCINDZTR Artikelbild RCINDZTR
centering mandrel for RCIND
RCINDZTR Centering mandrel for RCIND Centering mandrel made of 1.2767, centering diameter 7mm. The shank is tapered as well as the stamp to the rear, so that he can rotate freely when centering. For centering, drill a 7mm hole in a setup...
€9.90 *
available
RCFFE580 Artikelbild RCFFE580
steel back plate Ø80 mm for Emco Compact 5
RCFFE580 steel back plate Ø80 mm for Emco Compact 5 Centering 63 mm for self-centering chuck TOS 80 mm RCFU803 &RCFU804
€78.00 *
available
RCFUC5ER20 Artikelbild RCFUC5ER20
collet chuck ER20 for EMCO compact 5
RCFUC5ER20 collet chuck ER20 for EMCO compact 5 Ø outside mounting plate 49.5mm Ø inside mounting plate 40 mm holes circle 14 mm (3x 5.5 mm) total lenghts 42 mm (without nut)
€79.00 *
available
RC2AKR8 Artikelbild rcakr
Ball bearing centering shank 8 mm, with 2 ball bearing
RC2AKR8 Ball bearing centering shank 8 mm, with 2 ball bearing click on the link to watch the video https://www.youtube.com/watch?v=Bs0D5Ds-gTA
€35.00 *
available
RCAKR8 Artikelbild 8 mm
Ball bearing centering, shank 8 mm
RCAKR8 Ball bearing centering, shank 8 mm click on the link to watch the video https://www.youtube.com/watch?v=Bs0D5Ds-gTA
€30.00 *
available
RCFFSIM100 Artikelbild RCFFSIM125
steel back plate Ø 100 for Simonet and similar
RCFFSIM100 steel back plate Ø 100 for Simonet and similar with thread M38 x 2.5 centering 38 x 8 mm, length 20 mm, outside diameter Ø 37.8 mm, flank diameter Ø 36.6 mm made of high grade steel 42CrMo4
€89.95 *
1 From 10
Viewed