MODEL ENGINEERING

available

RCMH85

RCMH85 brass hammer 85 g 1 brass hammer weight 85 g head size 18 mm x 50 mm overall weight about 96 g overall length 205 mm

€6.80 *

available

RC200704

cast iron base - upper part for horizontal flamelickers

the quick solution for the production of a large flamelickers sizes below 130 x 100 mm dimensions above 100 mm dia dimensions Ø 50 mm hole to middle hole 95 mm

€39.00 *

available

RC200703

cast iron base - upper part for vertical flamelickers

above and below ground base, the quick solution for the production of a large flamelickers sizes below 200 x 95 mm dimensions above 100 mm dia dimensions Ø 55 mm hole overall height 200 mm

€49.00 *

available

RC200701

cast iron base for vertical flamelickers

above and below ground base fhe quick solution for the production of a large flamelicker sizes below 300 x 170 mm dimensions above 245 x 110 mm dimensions 138 x 55 mm hole overall height 120 mm

€56.00 *

available

RCM34-50-74020

STUART Pillar Drill 9 inch, set of castings

model description the Pillar Drill has a rising table operated by a rack and pinion mechanism, in the same way as full sized machines of the period were operated a choice of running speeds can be selected by utilising the stepped pulley...

auf Anfrage

available

RCM34-50-74010RTR

STUART Engineering Lathe , 8½" ready to run

RCM34-50-74010RTR STUART Engineering Lathe , 8½" ready to run diameter of the face plate Ø 40 mm model description the Stuart Engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the...

€1,130.00 *

available

RCM34-50-74010

STUART Engineering Lathe , 8½" set of castings

model description the Stuart engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the end of the 19th century and combining them to produce an attractive model please remember that...

€189.00 *