Top seller
available
available
available
available
available
available
available
available
No results were found for the filter!
available
RCINDST1-4V ![Artikelbild RCINDST1-4V_1]( "Artikelbild RCINDST1-4V_1")
punch 1/4" mm square, suitable for RCIND
punch 1/4" mm square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel
€19.00 *
available
RCFF125Z112 ![Artikelbild RCFF125Z112]( "Artikelbild RCFF125Z112")
steel back plate Ø125 mm, thread 1 1/2" - 8 TPI
steel back plate Ø125 mm, thread 1 1/2" - 8 TPI RCFF125Z112 steel back plate Ø125 mm, thread 1 1/2" - 8 TPI fitting on made of C45K or 42CRMOS4
€149.00 *
available
RCDUC860 ![Artikelbild RCDUC860_6]( "Artikelbild RCDUC860_6")
8 BEVEL DUCATI 860 cylinder head nuts M10 stainless steel
8 BEVEL DUCATI 860 cylinder head nuts M10 stainless steel RCDUC860 8 BEVEL DUCATI 860 cylinder head nuts M10 stainless steel M10 x 1.5 keysize 16 mm
€35.00 *
available
RCSTB3 ![Artikelbild RCSTB3]( "Artikelbild RCSTB3")
3 studs M10 x 42 ( 12 mm + 17 mm ) key width 17 mm
3 studs M10 x 42 ( 12 mm + 17 mm ) key width 17 mm RCSTB3 3 studs M10 x 42 ( 12 mm + 17 mm ) key width 17 mm Nr.09012 stud for RC6125 pos. 902 page 24
€29.00 *
available
RCIND055ST ![Artikelbild RCIND05ST]( "Artikelbild RCIND05ST")
punch 5,5 mm hex, suitable for RCIND
punch 5,5 mm hex, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RCIND07ST ![Artikelbild RCIND07ST 1]( "Artikelbild RCIND07ST 1")
punch 7 mm hex, suitable for RCIND
punch 7 mm hex, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel as well as for stainless steel with a low...
€19.00 *
available
RC2G70B10 ![Artikelbild RC2G70B10]( "Artikelbild RC2G70B10")
2° drill chuck arbors with B10 (RC2°70B10)
2° drill chuck arbors with B10 (RC2°70B10) GBZ262 2° drill chuck arbors with B10 (RC2°70B10) fits on Schaublin 70 smallest diameter of taper Ø 7,30 mm largest diameter of taper Ø 9,90 mm on a taper length of 40 mm
€14.90 *
available
available
RCFF125-3L ![Artikelbild RCFF125-3L_1]( "Artikelbild RCFF125-3L_1")
back plate Ø125 mm for chuck
back plate Ø125 mm for chuck RCFF125-3L back plate Ø125 mm for chuck compatible with RC6128,RC6125,RC2555 chuck centering Ø 95 mm hole circle chuck side, Ø 108 mm hole circle stud bolts Ø 74 mm internal bore Ø 52 mm hole 3 x 8,97 mm
€69.00 *
available
RCFFSH6580 ![Artikelbild Bild 816_82831]( "Artikelbild Bild 816_82831")
steel back plate Ø 80 for Schaublin 65 and similar
steel back plate Ø 80 for Schaublin 65 and similar RCFFSH6580 steel back plate Ø 80 for Schaublin 65 and similar with thread M19.75x1.75 made of high grade steel 42CrMo4
€69.00 *
available
RCFUSH65ER25 ![Artikelbild RCFUSH65ER25]( "Artikelbild RCFUSH65ER25")
collet chuck ER25 for Schaublin 65, thread M19.75x1.75
collet chuck ER25 for Schaublin 65, thread M19.75x1.75 RCFUSH65ER25 collet chuck ER25 for Schaublin 65, thread M19.75x1.75 accuracy is ± 0.025 mm
€75.00 *
available
RCINDST10V ![Artikelbild RCINDST10V_1]( "Artikelbild RCINDST10V_1")
punch 10 mm square, suitable for RCIND
punch 10 mm square, suitable for RCIND bore diameter = width key width from the punch + 0.25 mm bore depth = 1.6 x key width shank Ø 12 mm other punches on request ( shapes or dimensions ) the punches are not suitable for tool steel
€19.00 *
Viewed