Products from RCM-PRODUKTION
No results were found for the filter!
available
RCINDST10VHSS ![Artikelbild RCINDST10VHSS]( "Artikelbild RCINDST10VHSS")
punch 10 mm HSS square, suitable for RCIND
punch 10 mm HSS square, suitable for RCIND RCINDST10VHSS punch 10 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€27.00 *
available
RCINDST08VHSS ![Artikelbild RCINDST08VHSS]( "Artikelbild RCINDST08VHSS")
punch 8 mm HSS square, suitable for RCIND
punch 8 mm HSS square, suitable for RCIND RCINDST08VHSS punch 8 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€29.00 *
available
RCINDST06VHSS ![Artikelbild RCINDST06VHSS]( "Artikelbild RCINDST06VHSS")
punch 6 mm HSS square, suitable for RCIND
punch 6 mm HSS square, suitable for RCIND RCINDST06VHSS punch 6 mm HSS square, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€29.00 *
available
RCIND03STHSS ![Artikelbild RCIND03STHSS]( "Artikelbild RCIND03STHSS")
punch 3 mm hex HSS, suitable for RCIND
punch 3 mm hex HSS, suitable for RCIND RCIND03STHSS punch 3 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND07STHSS ![Artikelbild RCIND07STHSS]( "Artikelbild RCIND07STHSS")
punch 7 mm hex HSS, suitable for RCIND
punch 7 mm hex HSS, suitable for RCIND RCIND07STHSS punch 7 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
out of stock
RCIND05STHSS ![Artikelbild RCIND05STHSS]( "Artikelbild RCIND05STHSS")
punch 5 mm hex HSS, suitable for RCIND
punch 5 mm hex HSS, suitable for RCIND RCIND05STHSS punch 5 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND08STHSS ![Artikelbild RCIND08STHSS]( "Artikelbild RCIND08STHSS")
punch 8 mm hex HSS, suitable for RCIND
punch 8 mm hex HSS, suitable for RCIND RCIND08STHSS punch 8 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCIND10STHSS ![Artikelbild RCIND10STHSS]( "Artikelbild RCIND10STHSS")
punch 10 mm hex HSS, suitable for RCIND
punch 10 mm hex HSS, suitable for RCIND RCIND10STHSS punch 10 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
out of stock
RCIND06STHSS ![Artikelbild RCIND06STHSS]( "Artikelbild RCIND06STHSS")
punch 6 mm hex HSS, suitable for RCIND
punch 6 mm hex HSS, suitable for RCIND RCIND06STHSS punch 6 mm hex HSS, suitable for RCIND bore diameter = width key width from the punch + 0.1 mm bore depth = 1.6 x key width shank Ø 12 mm
€32.00 *
available
RCTF500_R ![Artikelbild RCTF500_R]( "Artikelbild RCTF500_R")
pom wheel Ø 127 x 40 mm with 2 ball bearings 6203-2RSH
pom wheel Ø 127 x 40 mm with 2 ball bearings 6203-2RSH suitable for table truct 500 kg 2RS: NBR sealing washers on both sides of the bearing
€29.60 *
available
RCTP3_12550 ![Artikelbild RCTP3_12550 (2)]( "Artikelbild RCTP3_12550 (2)")
pom wheel Ø 125 x 50 mm with 2 ball bearings 6003ZZ
pom wheel Ø 125 x 50 mm with 2 ball bearings 6003ZZ suitable for hand pallet truck 1,5 t, low profile, minimal height 50 mm 2Z: Steel cover plates on both sides of the bearing
€42.00 *
available
RCFF125M33 ![Artikelbild rcff125m33]( "Artikelbild rcff125m33")
aluminium back plate with thread M33x3.5, Ø 125 mm
aluminium back plate with thread M33x3.5, Ø 125 mm with 12 mounting holes M8 aluminum part Ø 125 mm about
€69.00 *
Viewed