Products from STUART
No results were found for the filter!
available
RCM34-50-74010 STUART Engineering Lathe , 8½" set of castings
model description the Stuart engineering Lathe has been carefully designed by taking the most interesting elements from lathes in use at the end of the 19th century and combining them to produce an attractive model please remember that...
€189.00 *
available
RCM34-50-72004 STUART Union Cock for 1/4" Pipe, threaded 3/8 x 26 tpi.
Schlauchanschluss 1/4"
€30.00 *
available
available
available
available
available
RCM34-50-71315 STUART S50, length 8½ inch , set of castings
model description the Stuart S50 is an elegant model of a typical mill engine, as used in the North of England, to power small factories throughout the 19th and early 20th Centuries the Stuart S50 is an ideal "first time" model...
auf Anfrage
available
RCM34-50-71306 STUART Twin Oscillator 64 mm, inch, set of castings
model description the twin oscillator is a new model developed from the recently revived S.T. Oscillator the main advantage of the Twin Oscillator over the single apart from the greater power, is that the engine comes complete with...
auf Anfrage
available
RCM34-50-71303 STUART Oscillator 64 mm, set of castings
model description the Stuart oscillator set of castings is an ideal "first time" model engineering project it is supplied as a full set of castings together with all the materials, fixings and drawings needed to finish the model please...
auf Anfrage
available
RCM34-50-71300 STUART Steam Hammer, height 10½ inch
RCM34-50-71300 STUART Steam Hammer, height 10½ inch ready to run assembled by a customer of us specifications height 10 1/2 Inches width 7 Inches cylinder Bore 1 Inch Diameter. cylinder Stroke 2 Inches.
€2,500.00 *
available
RCM34-50-71195 STUART 10H, length 6 inch, set of castings
model description the stuart 10H is a development from the popular 10V engine it is more than capable of 'doing work' and can easily power a small dynamo or pump. this small horizontal engine offers both power when run at high speed and...
auf Anfrage
available
RCM34-50-71183 STUART No. 10V, hength 6 inch, set of castings
steam model description the Stuart 10V is the most popular engine in our range the attractive design, and the fact that it can be built on a 3 1/2 in. lathe, make it an ideal project for the novice to assist the beginner the book "...
auf Anfrage
Viewed