Products from Vertex
No results were found for the filter!
out of stock
RCAPVS07 ![Artikelbild rcapvs05_74857]( "Artikelbild rcapvs05_74857")
Cast iron surface plate 450 x 450 x 75 mm, "VERTEX"
Cast iron surface plate 450 x 450 x 75 mm, "VERTEX" RCAPVS07 Cast iron surface plate 450 x 450 x 75 mm, "VERTEX" surface accuracy 0,006/100 mm
€480.00 *
available
out of stock
RCSTSMVSA ![Artikelbild RCSTSMVSA_1]( "Artikelbild RCSTSMVSA_1")
grinding wheel arbor Vertex for RCSTSMV and similar
grinding wheel arbor Vertex for RCSTSMV and similar RCSTSMVSA grinding wheel arbor Vertex for RCSTSMV and similar
€59.90 *
out of stock
RCSBS0 ![Artikelbild RCSBSO]( "Artikelbild RCSBSO")
"VERTEX" semi-universal dividing head with tailstock
"VERTEX" semi-universal dividing head with tailstock RCSBS0 "VERTEX" semi-universal dividing head with tailstock back plate Ø 134 mm and thread 1 1/8" x 12TPI dividing plates direct indexing on numbers 2-3-4-6-8-12-24 the warm gear ratio is 40:1 Numbers of dividing 15/16/...
€589.00 *
out of stock
RCRST ![Artikelbild 200082001751_78463]( "Artikelbild 200082001751_78463")
tailstock height adjustable from 45 to 110 mm "VERTEX"
tailstock height adjustable from 45 to 110 mm "VERTEX" RCRST tailstock height adjustable from 45 to 110 mm "VERTEX" for RCV100 / RC150DT "VERTEX"
€159.00 *
out of stock
RCMVS2 ![Artikelbild Bild 2874_77726]( "Artikelbild Bild 2874_77726")
7 pcs. set MT2 interchangeable point live center
7 pcs. set MT2 interchangeable point live center RCMVS2 7 pcs. set MT2 interchangeable point live center Original Vertex
€154.00 *
out of stock
RCMSD110V ![Artikelbild rcmsd110v]( "Artikelbild rcmsd110v")
VERTEX vise with swivel base
VERTEX vise with swivel base RCMSD110V VERTEX vise with swivel base jaw width 110 mm maximum jaw opening 190 mm overall height 130 mm distance between holes 245 mm
€349.00 *
out of stock
RCMSD100V ![Artikelbild 200082001467_77664]( "Artikelbild 200082001467_77664")
VERTEX vise with swivel base
VERTEX vise with swivel base RCMSD100V VERTEX vise with swivel base jaw width 100 mm jaw height 33 mm jaw opening 65 mm overall height 110 mm distance between holes 195 mm
€285.00 *
available
RCKMSN ![Artikelbild Bild 2924_76984]( "Artikelbild Bild 2924_76984")
coolant sprayer, "VERTEX"
coolant sprayer, "VERTEX" RCKMSN coolant sprayer, "VERTEX" for compressed air supply
€89.00 *
out of stock
RCER25152 ![Artikelbild pics 1100_75601]( "Artikelbild pics 1100_75601")
15 pcs. set collets MT2-ER25 from 1 - 16 mm VERTEX
15 pcs. set collets MT2-ER25 from 1 - 16 mm VERTEX RCER25152 15 pcs. set collets MT2-ER25 from 1 - 16 mm VERTEX chuck MT2, M10 thread and key included
€349.00 *
available
RCER1113 ![Artikelbild RC1113]( "Artikelbild RC1113")
13 pcs. set collets ER11 from 1 - 7 mm by 0,5 mm, Vertex
13 pcs. set collets ER11 from 1 - 7 mm by 0,5 mm, Vertex 13 pcs. set collets ER11 from 1 - 7 mm by 0,5 mm, Vertex collet chuck with shank Ø 16 mm
€219.00 *
available
RCDTK125 ![Artikelbild pics 957_75456]( "Artikelbild pics 957_75456")
economical type rapid indexer with chuck Ø 125 m, "VERTEX"
economical type rapid indexer with chuck Ø 125 m, "VERTEX" RCDTK125 economical type rapid indexer with chuck Ø 125 m, "VERTEX" 24 divisions from 15° with table scale 1° for vertical and horizontal use mounting surface of 160 x 160 mm through hole 22.5 mm chuck supplied with the inner and outer jaws
€490.00 *
Viewed