Top seller
available
available
available
available
available
available
available
available
No results were found for the filter!
out of stock
RCGBV24 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 2.4 mm
Tap Extensions for Square 2.4 mm RCGBV24 Standard DIN 377, Squares according to DIN 10 Drive connector Square 2.4 mm Length 70 mm
€4.20 *
available
RCGBV21 ![Artikelbild RCGBV]( "Artikelbild RCGBV")
Tap Extensions for Square 2.1 mm
Tap Extensions for Square 2.1 mm RCGBV21 Standard DIN 377, Squares according to DIN 10 Drive connector Square 2.1 mm Length 60 mm
€4.20 *
available
RCESX16-3-8 ![Artikelbild Bild 307_83295]( "Artikelbild Bild 307_83295")
Schaublin ESX16 ( ER16 ) collet Ø 9,52 mm 3/8"
Schaublin ESX16 ( ER16 ) collet Ø 9,52 mm 3/8" RCESX16-3-8 Schaublin ESX16 ( ER16 ) collet Ø 9,52 mm 3/8" clamping range 0.5 mm, so ± 0.5 mm below the nominal diameter "these items are only available ile stocks last"
€10.00 *
out of stock
RC4BFE160M2 ![Artikelbild RC4BFE160M2]( "Artikelbild RC4BFE160M2")
independant 4-jaw chuck 160 mm
independant 4-jaw chuck 160 mm RC4BFE160M2 independant 4-jaw chuck 160 mm maximum speed 2500 rpm Dø = 160 mm D1 = 65 mm D2 = 95 mm D3 = 55 mm H1 = 65 mm h = 5 mm z-d = 4 x 11 mm net weight 9 kg
€168.00 *
available
RCDD1163E ![Artikelbild RCDD1163E]( "Artikelbild RCDD1163E")
1 spare holder for 12 mm tourning tools, for RCDD1163
1 spare holder for 12 mm tourning tools, for RCDD1163 RCDD1163E 1 spare holder to 12 mm for RCDD1163
€19.95 *
available
RCDD1163 ![Artikelbild RCDD1163]( "Artikelbild RCDD1163")
quick change tool post with 4 holders
quick change tool post with 4 holders RCDD1163 quick change tool post with 4 holders tool post aluminium 45 x 45 x 40 mm 2 spare holder to 12 mm 1 spare boring holder to 9,5 mm 1 spare cut-off blade holder , without blade (RCABME) 1 screw M8 x 78 mm 1 screw M10 x 80 mm...
€129.00 *
available
RCW20M12 ![Artikelbild RCW20M12_2]( "Artikelbild RCW20M12_2")
W20/thread S19.7 x 1.666 drill chuck arbors with M12x1
W20/thread S19.7 x 1.666 drill chuck arbors with M12x1 RCW20M14 W20/thread S19.7 x 1.666 drill chuck arbors with M14x1 material 42CrMoS steel!
€29.00 *
available
RCFFLZ220080 ![Artikelbild Bild 001_86226]( "Artikelbild Bild 001_86226")
steel back plate Ø 80 mm for Weiler LZ220
steel back plate Ø 80 mm for Weiler LZ220 RCFFLZ220080 steel back plate Ø 80 mm for Weiler LZ220 and identical machines! with thread M40x3.5, fit 42 mm suitable for mounting a 80 mm chuck!
€79.00 *
available
RCINDZTR ![Artikelbild RCINDZTR]( "Artikelbild RCINDZTR")
centering mandrel for RCIND
centering mandrel for RCIND RCINDZTR Centering mandrel for RCIND Centering mandrel made of 1.2767, centering diameter 7mm. The shank is tapered as well as the stamp to the rear, so that he can rotate freely when centering. For centering, drill a 7mm hole in a setup...
€9.90 *
available
RCFFE580 ![Artikelbild RCFFE580]( "Artikelbild RCFFE580")
steel back plate Ø80 mm for Emco Compact 5
steel back plate Ø80 mm for Emco Compact 5 RCFFE580 steel back plate Ø80 mm for Emco Compact 5 Centering 63 mm for self-centering chuck TOS 80 mm RCFU803 &RCFU804
€78.00 *
available
RCFUC5ER20 ![Artikelbild RCFUC5ER20]( "Artikelbild RCFUC5ER20")
collet chuck ER20 for EMCO compact 5
collet chuck ER20 for EMCO compact 5 RCFUC5ER20 collet chuck ER20 for EMCO compact 5 Ø outside mounting plate 49.5mm Ø inside mounting plate 40 mm holes circle 14 mm (3x 5.5 mm) total lenghts 42 mm (without nut)
€79.00 *
available
RC2AKR8 ![Artikelbild rcakr]( "Artikelbild rcakr")
Ball bearing centering shank 8 mm, with 2 ball bearing
Ball bearing centering shank 8 mm, with 2 ball bearing RC2AKR8 Ball bearing centering shank 8 mm, with 2 ball bearing click on the link to watch the video https://www.youtube.com/watch?v=Bs0D5Ds-gTA
€35.00 *
Viewed