Top seller
No results were found for the filter!
available
RCAKR8 Ball bearing centering, shank 8 mm
RCAKR8 Ball bearing centering, shank 8 mm click on the link to watch the video https://www.youtube.com/watch?v=Bs0D5Ds-gTA
€30.00 *
available
RCAWB 3 engraved aluminium soft jaws for Haas Mori Kitagawa
RCAWB 3 individual jaws(1 set) for typical 10" chuck, with 1.5mm serrations. Jaws are 2" inch tall, 1.5" inch wide, and full 5" inch length. Precision machined all surface for maximum repeat-ability. Engraved reference lines to assist in...
€59.00 *
out of stock
RC200DT4 rotary table Ø 200 mm, "VERTEX" with 4 T-slots 14 mm
for horizontal and vertical use height horizontal 105 mm 4 T-slots 14 mm the warm gear ratio is 90:1 centre sleeve MT3 center height 135 mm 28kg
€529.00 *
available
RCGSF4.7 quick change tapping drill chuck MT4
RCGSF4.7 quick change tapping drill chuck MT4 including 7 collets for thread cutting from M3 to M12 shank Ø x square M3 2.24 x 1,80 mm M4 3.15 x 2,50 mm M5 4.0 x 3,15 mm M6 4.5 x 3,55 mm M8 6.3 x 5,00 mm M10 8.0 x 6,30 mm M12 9.0 x 7,00 mm
€169.00 *
available
RCRST3898 tailstock height adjustable from 60 to 85 mm
RCRST3898 tailstock height adjustable from 60 to 85 mm distance between mounting holes 90 mm
€49.00 *
available
RCFFSIM100 steel back plate Ø 100 for Simonet and similar
RCFFSIM100 steel back plate Ø 100 for Simonet and similar with thread M38 x 2.5 centering 38 x 8 mm, length 20 mm, outside diameter Ø 37.8 mm, flank diameter Ø 36.6 mm made of high grade steel 42CrMo4
€89.95 *
available
RCFFSIM125 steel back plate Ø 125 for Simonet and similar
RCFFSIM125 steel back plate Ø 125 for Simonet and similar with thread M38 x 2.5 centering 38 x 8 mm, length 20 mm, outside diameter Ø 37.8 mm, flank diameter Ø 36.6 mm made of high grade steel 42CrMo4
€89.00 *
available
RCZKl235 adjustable centering punch Ø up to 35 mm
RCZKl235 adjustable centering punch Ø up to 35 mm engineers bell punch center finder bell punch easily locates and allows center punching of ends on round stock of up to 35 mm hardened to 48-52 HRC a very handy tool if required precise...
€19.90 *
available
RCDSD30 lathe mandrel hardened and ground Ø 30 mm, length 250 mm
RCDSD30 lathe mandrel hardened and ground Ø 30 mm, length 250 mm overall length 250 mm net weight 1380 gr
€19.95 *
available
available
available
Viewed