Top seller
available
available
available
available
available
available
available
available
No results were found for the filter!
available
RCM34-50-71195 ![Artikelbild 200082000019_72870]( "Artikelbild 200082000019_72870")
STUART 10H, length 6 inch, set of castings
STUART 10H, length 6 inch, set of castings model description the stuart 10H is a development from the popular 10V engine it is more than capable of 'doing work' and can easily power a small dynamo or pump. this small horizontal engine offers both power when run at high speed and...
auf Anfrage
available
RCM34-50-71183 ![Artikelbild 200082003144_72869]( "Artikelbild 200082003144_72869")
STUART No. 10V, hength 6 inch, set of castings
STUART No. 10V, hength 6 inch, set of castings steam model description the Stuart 10V is the most popular engine in our range the attractive design, and the fact that it can be built on a 3 1/2 in. lathe, make it an ideal project for the novice to assist the beginner the book "...
auf Anfrage
available
RCM34-50-71151RTR ![Artikelbild 200082000016_72865]( "Artikelbild 200082000016_72865")
STUART No. 1, height 13 inch, ready to run
STUART No. 1, height 13 inch, ready to run " assembled by a customer of us, ready to run " model description the first Stuart No.1 was built by Mr. Stuart Turner over one hundred years ago It is a classic design, and so beautifully proportioned, that it makes the perfect display...
€1,979.00 *
available
RCM34-50-10143 ![Artikelbild 34-50-10143]( "Artikelbild 34-50-10143")
STUART Puffin Horizontal Marine Power
STUART Puffin Horizontal Marine Power Model Description: The Puffin engine is a twin in-line oscillating engine. We offer it mounted on a baseplate complete with a Horizontal Boiler. The plant is suitable for powering small steam launches of approximately 3 feet length....
€1,290.00 *
available
available
available
available
available
RCM32-50-72070 ![Artikelbild 32-50-72070]( "Artikelbild 32-50-72070")
STUART tap BA5 second
STUART tap BA5 second RCM32-50-72070 STUART tap BA5 second hand tap, BA-thread, ISO 529 Stuart 32-50-72070 overall length 50 mm cutting length 17 mm shank Ø 3,15 mm square 2,55 mm
€11.50 *
available
RCM32-50-72069 ![Artikelbild 32-50-72069_1]( "Artikelbild 32-50-72069_1")
STUART taps BA5 pre-cutter
STUART taps BA5 pre-cutter RCM32-50-72069 STUART taps BA5 pre-cutter overall length 50 mm cutting length 17 mm shank Ø 3,15 mm square 2,55 mm
€11.50 *
out of stock
RCM34-50-71387 ![Artikelbild 200082000024_72881]( "Artikelbild 200082000024_72881")
STUART Steam Hammer, height 10½ inch, set of castings
STUART Steam Hammer, height 10½ inch, set of castings model description the Steam Hammer is based on Rigby's patented design and model engineers will enjoy the challenge of building an entirely different style of steam model the completed engine can be easily run on a small boiler, the SH3...
€449.00 *
Viewed