Our shops: RCM CREATIONS · RCM MACHINES
Bancontact - Maestro - MasterCard - VISA
  • SALES -10 %
Offers in:
Offers for:
Top seller
available
SPHBF3FZY Artikelbild Bilder 585_88885 Cylinder for RCHBF3F
€41.40 *
available
RC30TZY Artikelbild rc30tzy cylinder for RC30T
€215.00 *
available
available
available
Close filters
 
  •  
  •  
  •  
from to
1 From 5
No results were found for the filter!
available
SPQHDS Artikelbild SPQHDS
seal kit forATV and motorcycle lift
€23.50 *
available
RCTF500_RALPU Artikelbild RCTF500_RALPU
wheel in alu & PU Ø 125 x 40 mm with 2 ball bearings
wheel alu wih du Polyurethane including 2 sockets and 2 bearings suitable for table truct 500 kg capacity per wheel 300 kg
€37.00 *
available
RCRO45ALM12 Artikelbild rcro45alm12
roll, wheel diameter Ø 45 mm, overall height 66,50 mm
RCRO45ALM12 roll, wheel diameter Ø 45 mm, overall height 66,50 mm mounting screw M12 x 25 mm hexagonal 21.90 mm alu wheel with ball bearing mounted and rotatable 360 °
€34.00 *
available
RCRO50M12 Artikelbild rcro50m12
roll, wheel diameter Ø 50 mm, overall height 77,50 mm
RCRO50M12 roll, wheel diameter Ø 50 mm, overall height 77,50 mm mounting screw M12 x 20 mm square 12.50 mm nylon wheel with ball bearing mounted and rotatable 360 °
€34.00 *
available
RCRO90F Artikelbild rcrof
fixed, roll, wheel diameter Ø 90 mm, overall height 105 mm
RCRO90F fixed, roll, wheel diameter Ø 90 mm, overall height 105 mm distance between holes 75 x 30 mm
€34.00 *
available
RCTF500_R Artikelbild RCTF500_R
pom wheel Ø 127 x 40 mm with 2 ball bearings 6203-2RSH
suitable for table truct 500 kg 2RS: NBR sealing washers on both sides of the bearing
€29.60 *
available
RC30TPUMP Artikelbild rc30tpump
hydraulic cylinder, oil pump 30t
RC30TPUMP hydraulic cylinder, oil pump 30t
€129.00 *
available
RCTP3_12550 Artikelbild RCTP3_12550 (2)
pom wheel Ø 125 x 50 mm with 2 ball bearings 6003ZZ
suitable for hand pallet truck 1,5 t, low profile, minimal height 50 mm 2Z: Steel cover plates on both sides of the bearing
€42.00 *
available
RCRO50 Artikelbild RCRO50
roll, wheel diameter Ø 50 mm, overall height 62 mm
RCRO50 roll, wheel diameter Ø 50 mm, overall height 62 mm suitable for shop crane distance between holes 50 x 25 mm with ball bearing mounted and rotatable 360 °
€26.00 *
out of stock
RCWSK2PUMP Artikelbild RCWSK2PUMP
pump 8 ton for RCWSK2, SP01201
€96.00 *
available
RCWSPDS Artikelbild rcwspds
sealing set for shop press 10 t (RCWSP&RCWSP10T)
€27.00 *
available
RCP15APOS26 Artikelbild RCP15APOS26
nylon wheel Ø 50 x 135 mm, hole Ø16 mm for RCP15A
front wheel for aluminum jack
€23.00 *
1 From 5
Viewed